Galvanized air ducts have a wider and wider range of applications and have played a great role in various industries. Galvanized air duct is a very important part of the air conditioning system, and it uses different materials according to the needs of users. Galvanized air ducts are used to transport air (supply and return air systems) and remove harmful gases (exhaust air systems). The following are several material analysis of galvanized air ducts: ordinary cold-rolled steel plate: cheap, easy to corrode, general ventilation, supply air, return air, fresh air, exhaust air, smoke exhaust system. Galvanized steel sheet: Corrosion resistance is better than just finished, but in the process of processing, the iron sheet has higher requirements on temperature and humidity for the supply and return air system, the medium-efficiency filtration of the ultra-clean system, easy to fall off, and the paint is not easy to adhere to the front and middle efficiency Air supply system between the filters.
Galvanized air ducts are noisy. To a large extent, it is actually based on physical principles. The faster the air moves, the greater the noise. Next, about the galvanized air Pipe, there will be certain points of attention in the daily maintenance, often checking the aging protection of galvanized air duct equipment has played a very good effect, and it is also of great help in reducing noise.
Since the galvanized air duct manufacturer does not have a good noise reduction function when using it, we need to add a muffler to the air duct, and its thermal conductivity is too large, so it has no heat preservation function, so we need to add another package when using it. The thermal insulation layer also has requirements on the use environment. It should not be used next to some environments with relatively high humidity. This often makes the galvanized air duct easy to rust due to the influence of the environment.
real stuff
◆All products are professionally purchased by WISCO Group 0.5-1.2CM
Galvanized sheet.
◆The galvanized layer reaches 80MM-275MM, strong corrosion resistance, anti-corrosion
The compressive strength is above 3000PA.
◆The first acceptance rate of products is over 98%.
High quality and durable
◆At least 7 sets of equipment are forged to international standards, higher than the national standard
grid production.
◆Provide a series of air duct installation, maintenance, accessories replacement, etc.
After-sales service.
◆After-sales service period of 2 years, product design service life of 20 years
year.
Imported equipment
◆Imported production equipment, product processing accuracy is 0.5MM
The welding length can reach 1.25M.
◆The annual processing of galvanized sheet can reach 2 million m², ensuring on-time
delivery.
◆Product material is made of WISCO and domestic well-known brand manufacturers.
Standard materials, the price is lower than the same industry, cost-effective.
First-class workshop
◆More than 20 years of focus on the research and development of air ducts and related supporting products,
Production, installation one-stop service.
◆6000 square meters of production plant, galvanized sheet processing up to 200
10,000 square meters of guaranteed supply.
◆Has more than 200 professional technical, production and installation personnel.
◆Passed ISO9001 quality management system certification.
Hubei Jiangcheng Weiye Ventilation Engineering Co., Ltd., the predecessor of Wuhan Jiangcheng Weiye Mechanical and Electrical Installation Engineering Co., Ltd., was established in 1997 and is a senior unit in vigorous development. Combining more than 20 years of experience in the production and installation of air ducts for on-site thermal insulation material construction projects, the company has finally ushered in roots and sprouts.
A 6,000-square-meter modern production factory has been built in Optics Valley Science and Technology City, Gedian High-tech Development Zone, Hubei, with 3 advanced assembly lines. The professional production mainly focuses on the sales and installation of ventilation pipes and dampers. Smoke exhaust fan; focus on ventilation engineering, spiral air duct, common plate flange air duct, angle iron flange, stainless steel round flange, muffler, static pressure box, angle code, burr-free finished clips, valves, louver tuyere, Fans, shock-absorbing springs and other ventilation products. Product material: galvanized iron sheet, stainless steel sheet, carbon steel welded;
Because it is professional, it is more efficient. Because of professionalism, we can better control costs, reduce prices, and benefit customers.
With a professional air duct installation and construction team and rich construction experience, we have completed several hundred thousand square meters of air duct ventilation projects. The annual sales of thermal insulation materials are more than 30,000 cubic meters. Because he has been engaged in air duct engineering for many years, Jiangcheng Weiye has a deep understanding of the needs of customers, and makes every effort to provide customers with products and projects with advantages in quality and price-performance ratio. We adhere to the spirit of "customer first", formulate and provide personalized high-quality services according to the needs of each customer, in order to help customers achieve their goals accurately, create high-quality projects, our products win with high quality, and have a good reputation in the industry , welcomed by many customers. The company adheres to the principle of quality and integrity, and constantly strives for perfection to satisfy customers. There is reason to believe that we will grow together with our customers in the days to come! We would like to cooperate wholeheartedly and create brilliance together!
CONTACT US：whjcwy@sina.cn